Step 01:

Place the oven dome on a flat table, exposing the 2 screw holes for the mounting leg. Use caution when turning and lifting the oven – may hurt your hands or pinch your fingers . If necessary use gloves for protection.

Step 02:

Align the mounting leg with the 2 screw holes and turn them clockwise into the oven dome body.

Step 03:

Put the oven dome with 2 short mounting leg installed to the middle of the table, lift the oven dome body, and install the remaining mounting legs.

Step 04:

Install the oven door, make sure the tip of oven door enter into the slot position.

Step 05:

Install the chimney on the oven dome body, and twist the chimney counterclockwise to locate it to the base. And the oven is ready for use.

WARNING

• Please always keep the gas bottle in upright position.
• If the appliance is not in use, the gas must be turned off at the supply cylinder.
• The cylinder used must include a collar to protect the cylinder valve..
• The minimum distance from the appliance to the wall is 20 inches(508mm).
• The minimum size of the table is 40×40 inches(1016×1016mm).

STATEMENT

•Do not store a spare LP gas cylinder under or near this appliance;
•Never fill the cylinder beyond 80 percent full; and
•If the instructions are not followed exactly, a fire causing death or serious injury may occur.