Notice:

First, loosely twist the screws for initial fixation, but do not tighten them to ensure proper installation of each component. After all components have been installed, tighten all the screws for fixation to ensure the stability and safety of the stand.

Step 01:

Install the two front wheels on the two front leg(F1,F2) .Use a wrench and a M8 Allen key to secure the screws.

Step 02:

Install the two rear wheels on the two rear legs(B1,B2) with screws and nuts. Use a wrench and a M8 Allen key to secure the screws.

Step 03:

Install the retaining ring to fix the gas cylinder. Use a M5 Allen key to secure the screws.

Step 04:

Attach the 4 legs to the shelf with screws. Use an M8 allen key to secure the hexagon socket screws. Pay attention to check the left and right signs.

Step 05:

Install the 4 support frames on to the 4 legs.

Step 06:

Use a hexagon socket screws to secure the 4 support frames.

Step 07:

Install the oven rack. Fix the oven rack and the support frame with M8 hexagon socket screws.

Step 08:

The stand assembly is completed. Sit pizza oven on top shelf with front opening over the large wheels.

WARNING

Watch your hands and fingers when placing the oven on the stand!