WARNING
Please note that it is important to ensure that the oven has completely cooled down before making any adjustments or replacements to the pizza stone.

Step 01

Remove the oven door, then use a screwdriver to lift up the pizza stone (1) from the hole marked with a red dot on the bottom plate of the oven.

Step 02

Take out the pizza stone (1) on the right side.

Step 03

Pick up the pizza stone (2) from the hole marked with a red dot on the bottom plate of the oven and then move it to the right.

Step 04

Take out the pizza stone (2) on the left side.

Step 05

Pick up the pizza stone (3) near the oven’s front opening from the hole marked with a red dot on the bottom plate of the oven.

Step 06

Move the pizza stone (3) toward the burner, then rotate it 90 degrees clockwise. Be careful not to scratch the burner！

Step 07

Remove the pizza stone (3).

Step 01

Install the pizza stone (3) near the oven’s front opening. You need to put the sharp corner to the right before putting it into the oven.

Step 02

Rotate pizza stone (3) 90 degrees counterclockwise and then move the pizza stone outward. Be careful not to scratch the burner！

Step 03

Install the pizza stone (2) to the left side.

Step 04

When placing the pizza stone (2), the notch should correspond to the burner. At the same time, the corner of the pizza stone (2) should align with the edge of the pizza stone (3) (The bolded position in red show as below should bealigned.)

Step 05

Install the pizza stone (1) to the right side. When installing, use a screwdriver to hold the pizza stone (1) from the hole marked with a red dot on the bottom of the oven. When putting it down ,handle with care to avoid the damage of the pizza stone.
(Please note: There may be gaps between the pizza stones at this time. You can slightly adjust pizza stones with screwdriver through the hole at the bottom plate of oven, to make sure pizza stones tightly fitted together.)

We are seeking distributors for our FIAMO clay pizza ovens. Welcome to join us!